The problem

You need accurate as-built data but traditional survey is too slow or incomplete

Renovating a heritage building with no drawings. Verifying construction against the BIM model. Documenting a complex industrial plant for shutdown planning. In each case, you need millimetre-accurate spatial data of existing conditions, and tape measures, total stations, or 2D survey just cannot capture the full geometry in a reasonable timeframe. Incomplete as-built data leads to design clashes, rework, and budget overruns.

The solution

Brisbane Point Cloud captures the full geometry in a single site visit

Using terrestrial LiDAR scanners and UAV photogrammetry, the team captures millions of 3D measurement points across your site in hours. The raw point cloud is registered, cleaned, and delivered as a navigable 3D model or converted to Revit, AutoCAD, or other BIM formats. Architects, engineers, and contractors get a true digital twin of existing conditions to design against.

Visit brisbanepointcloud.com

Capabilities

013D LiDAR Scanning
02Aerial & UAV Mapping
03Scan-to-BIM
04Heritage Documentation
05Construction Verification
06As-Built Surveys

When to engage Brisbane Point Cloud

Renovating or extending a building with no reliable as-built drawings

Verifying construction progress against the design BIM model

Documenting a heritage building for conservation or adaptive reuse

Planning a complex shutdown or retrofit where clashes would be costly

Ready to solve this problem?

Visit Brisbane Point Cloud for full service details, project examples, and to request a scope.

Go to brisbanepointcloud.com