The problem

Your height safety anchors are overdue for testing or a new install needs certification

WHS regulations require that roof anchors and fall-arrest systems be tested at defined intervals. Missed testing exposes the building owner, strata body corporate, and any contractor who connects to the system to personal liability. New anchor installations also require proof-load certification before workers can rely on them. Without a current test certificate, the anchor system is non-compliant.

The solution

Anchor Testing Australia certifies every anchor point on your building

The team mobilises to site with calibrated, NATA-traceable hydraulic testing equipment and applies proof loads to each anchor in accordance with AS/NZS 5532. Every anchor is individually identified, tested, tagged, and recorded. You receive a compliance certificate, a detailed report with pass/fail results per anchor, and a recommended re-test schedule. Failed anchors are flagged for replacement.

Visit anchortesting.au

Capabilities

01Proof Load Testing
02Ultimate Load Testing
03Height Safety Compliance
04Anchor Recertification
05Lifeline & Cable Testing
06Fall Arrest System Audits

When to engage Anchor Testing Australia

Roof anchors have not been tested in the last 6 to 12 months (state-dependent)

A new height safety system has been installed and needs certification before use

A contractor has refused to connect because test certificates are expired

You are preparing a building for sale or re-leasing and need current compliance records

Ready to solve this problem?

Visit Anchor Testing Australia for full service details, project examples, and to request a scope.

Go to anchortesting.au