Our Network
Problems We Solve
Forensic Engineering Group operates alongside a network of specialist firms. Each one exists to solve a specific category of problem for building owners, engineers, strata managers, and asset operators.
Your structure is showing signs of distress and you need engineering answers
Cracks appearing in walls. Concrete spalling from soffits. A balcony slab that deflects under load. Water staining through joints that should be sealed. These are symptoms of deeper structural problems that require independent engineering investigation, not a contractor quote. Without root-cause diagnosis, repairs fail repeatedly and liability grows.
TRSC Structural Engineering
trsc.au
Your building facade is deteriorating and you cannot see the full extent from ground level
Tiles cracking or delaminating on upper floors. Sealant joints failing and allowing water behind cladding. Render bulging or separating from substrate. Facade defects on high-rise buildings are invisible from the street and dangerous to occupants below. Council may issue a show-cause notice, or worse, a public safety order that restricts building use until the facade is assessed.
Facade Inspect
facadeinspect.au
You need to inspect a roof, asset, or site but access is dangerous, slow, or expensive
Scaffolding a warehouse roof for a visual inspection costs tens of thousands of dollars and weeks of lead time. Sending people onto fragile roofing risks falls and further damage. Multi-storey assets, solar arrays, and infrastructure corridors all present the same access problem: you need eyes on the asset, but getting there safely is the bottleneck.
Drone Inspection Services
droneinspection.services
Your height safety anchors are overdue for testing or a new install needs certification
WHS regulations require that roof anchors and fall-arrest systems be tested at defined intervals. Missed testing exposes the building owner, strata body corporate, and any contractor who connects to the system to personal liability. New anchor installations also require proof-load certification before workers can rely on them. Without a current test certificate, the anchor system is non-compliant.
Anchor Testing Australia
anchortesting.au
Construction vibration is damaging neighbours, or your structure is moving and you need proof
A developer next door is piling, excavating, or demolishing, and cracks are appearing in your building. Or your own project has DA conditions requiring vibration, noise, and dust monitoring. Or a structure you manage is showing slow movement and you need data, not guesswork, to decide whether intervention is needed. In all cases, you need continuous, defensible measurement with engineering review.
Oculus Technology
oculustech.au
You need accurate as-built data but traditional survey is too slow or incomplete
Renovating a heritage building with no drawings. Verifying construction against the BIM model. Documenting a complex industrial plant for shutdown planning. In each case, you need millimetre-accurate spatial data of existing conditions, and tape measures, total stations, or 2D survey just cannot capture the full geometry in a reasonable timeframe. Incomplete as-built data leads to design clashes, rework, and budget overruns.
Brisbane Point Cloud
brisbanepointcloud.com
Part of
Trinity Group
All group companies are owned and operated under Trinity DAO Pty Ltd (ABN 14 681 800 724), delivering engineering, inspection, and technology services from Brisbane to clients across Australia.
Visit Trinity Group